Guide
Fire extinguisher types and classes: which one for which fire
A buyer's reference to the six fire classes and the extinguisher types that match them, with the warnings that matter.
Choosing an extinguisher starts with the fire it must fight, not with the extinguisher. Fire services describe fires in classes by what is burning, and each extinguisher type is suitable for some classes and unsuitable, sometimes dangerous, for others. This guide summarises two published fire service and trade-body guides.
The fire classes
- Class A: combustible solids such as wood, paper and fabric.
- Class B: flammable liquids such as petrol, paint and turpentine.
- Class C: flammable gases such as methane, butane and hydrogen.
- Class D: combustible metals such as aluminium, magnesium and potassium.
- Class F: cooking oils and fats.
- Electrical: fires involving electrical equipment. Once the item is isolated, the fire falls into another class.
Extinguisher types and where they fit
- Water: suitable for Class A. Not for electrical, cooking oil, flammable liquid or gas fires.
- Foam: Classes A and B. Not for electrical fires, kitchen fires or flammable metals.
- Dry powder: standard powder covers A, B and C and electrical up to 1,000 volts, but not cooking oil fires. Specialist powders exist for metal fires.
- CO2: Class B and electrical fires.
- Wet chemical: Class F cooking oil fires and, in one guide, Class A. Not for electrical fires.
- Water mist: listed for several classes at short distances, with lower ratings than other extinguishers for some classes.
Warnings from the guides
- Water, including water with additive, conducts electricity.
- Dry powder leaves residue, reduces visibility when discharged and can corrode electrical equipment.
- CO2 is an asphyxiant. Avoid confined spaces. The horn can cause frost burn.
- Wet chemical solution is alkaline and can irritate skin and eyes.
- Anyone expected to use an extinguisher should be trained.
Fire blankets
Fire blankets suit small fires, particularly fat, oil or grease in a cooking area. They are not for large fires. The catalogue lists fire blankets within the fire safety and emergency range.
Matching to locations
- Offices and stores with paper and fabric: Class A water or foam.
- Workshops with oils and fuel: foam or dry powder for Class B.
- Server and electrical rooms: CO2 or dry powder in line with your fire consultant.
- Kitchens: wet chemical and a fire blanket.
- Metal working: a specialist powder if combustible metal is present.
These are typical patterns, not instructions. The fire strategy for the building, your consultant or the civil defence authority decides the type, size and quantity.
Signs, mounting and servicing
Extinguishers are placed with signs so they can be found quickly, and they need periodic inspection. Safety signs are listed in the catalogue, so you can include them in the same RFQ. Servicing is outside what this website quotes, so confirm that separately with your service provider.
A worked example
A small workshop has benches with wood and paper, a fuel store and a distribution board. The fire classes are A for wood and paper, B for the fuel and electrical for the board. One dry powder extinguisher covers A, B and C and electrical up to 1,000 volts, according to the fire service guidance above. A CO2 unit at the board suits electrical risk with no powder residue. The example only shows the method. The fire strategy and local rules decide what is actually installed.
Common mistakes in extinguisher orders
- Buying only one type. No single type suits all classes.
- Placing water extinguishers near live equipment.
- Forgetting a wet chemical unit and fire blanket in kitchens.
- Putting CO2 in a confined space without considering the guidance.
- Skipping signage, which helps people find the unit.
Questions to ask any supplier
- Which class ratings does the unit carry, shown on its datasheet?
- What is the agent mass or volume?
- Which brackets, signs and covers are offered?
- Which documents come with the goods?
- Is servicing offered separately, and by whom?
What to put in the RFQ
- Type and agent: water, foam, dry powder, CO2 or wet chemical
- Size in kilograms or litres and the number of each
- Class rating your fire consultant requires
- Wall brackets, trolleys or covers
- Signs and signage language
- Delivery site and date
- Brand preference or “equivalent”
Send the list on the fire extinguishers page.
What this guide does not do
It does not state that any extinguisher we quote carries a rating. It is not fire safety design advice. Ask for the datasheet of the exact unit offered.
Ready to quote?
Send the item, specification, quantity and delivery location. Open the quote form with this topic filled in, or email sales@vmv-solutions.com.
Frequently asked questions
Is there one extinguisher for every fire?
No. Fire service guidance states that no single extinguisher type can be used on all classes of fire.
Can I use water on an electrical fire?
No. Water conducts electricity, so it is unsuitable for electrical fires or use near live equipment.
Is CO2 safe in a small room?
CO2 is an asphyxiant and is not advised in confined spaces. The horn can cause frost burn if touched during use.
Who decides how many extinguishers a site needs?
Your fire safety consultant, building owner or the local civil defence authority. A supplier quotes the type and size you specify.
Are fire blankets an alternative?
Fire blankets suit small fires, especially fat, oil and grease in kitchens, and are not for large fires.
Sources
Surrey Fire and Rescue: extinguishers and fire blankets | Fire Protection Association: what fire extinguisher to use
