Products
Pipes and Fittings in the UAE: Copper, PVC and Refrigeration Fittings
VMV Solutions LLC quotes pipes and fittings for UAE buyers, including copper fittings for air conditioning and refrigeration and the UV fittings listed in the catalogue.
Pipes and fittings are specified by material, size, pressure class and connection type. VMV Solutions LLC lists copper fittings for air conditioning and refrigeration and UV fittings in several sizes in its catalogue, and quotes pipe and fitting lists from MEP contractors, facilities teams and workshops across the UAE. No prices are displayed.
What is in the range
- Copper elbow 180 degrees and 45 degrees
- Copper reducing coupling and copper reducing tee, listed for air conditioning and refrigeration
- Refrigeration filter drier, copper
- UV elbow, tee, tee reducer, elbow reducer, bushing reducer, plug, socket coupling and threaded elbow
The catalogue lists the UV fittings in sizes from 20 mm to 63 mm with several reducer combinations. See the pipes and fittings category.
Describing a fitting
- Product type: elbow, tee, coupling, reducer, plug, bushing or filter drier
- Material
- Size, with both sizes for a reducer
- Connection: socket, threaded or brazed
- Pressure rating or class
- Fluid or system: chilled water, refrigerant, drainage or potable water
- Standard or drawing reference
Ask for a datasheet on the exact fitting offered if your specification calls out pressure or temperature.
Copper fittings for refrigeration
Copper fittings for refrigeration are matched to the pipe size and the connection method, usually brazed. Give the pipe outer diameter, the angle or branch type and the number needed. The related HVAC and refrigeration page covers refrigerant gas and the other items that go on the same job.
Plastic pipe and fittings
The old site has a guide to flexible PVC pipe. For plastic pipe requests give material, outside diameter, wall thickness or class, length and the fluid.
Valves and wider EPC items
The old site also describes valves and valve automation among EPC supplies. Send valve type, size, pressure class, body material and end connections with the quantity.
Mistakes that slow a fitting order
- Writing “2 inch elbow” with no material, angle or connection.
- Mixing metric and inch sizes in the same list.
- Leaving out the pressure class.
- Ordering a reducer with one size.
- Forgetting the system. A fitting for chilled water is not the same item as one for refrigerant.
A sample request
“Quote 100 copper elbows, 90 degrees, 3/4 inch, brazed; 50 copper reducing tees, 7/8 x 5/8 inch; 20 filter driers, 3/8 inch flare; 60 UV elbows, 32 mm, socket; 40 UV tee reducers, 40 x 32 mm; pressure class per attached schedule; delivery to a site in Sharjah.” The reply can then state which lines can be supplied.
How to specify
- Pipe or fitting type, material and size
- Connection and pressure class
- Fluid or system
- Standard or drawing reference
- Quantity per item
- Delivery site and date
How the quotation works
Send the list through the form, attach a BOQ if you have one, or call +971 50 496 8972. We check the details and reply with a quotation. Prices are not shown online and delivery timing is stated in the reply.
Related items
Pair this with HVAC and refrigeration supplies and the wider facilities management and MEP range. For delivery to Sharjah, see Sharjah supply.
Ready to quote?
Send the item, specification, quantity and delivery location. Open the quote form with this topic filled in, or email sales@vmv-solutions.com.
Frequently asked questions
Which fittings are listed?
Copper elbows at 180 and 45 degrees, a copper reducing coupling, a copper reducing tee, a refrigeration filter drier, and UV elbows, tees, plugs, socket couplings, threaded elbows and reducers.
Which sizes are listed for the UV fittings?
The catalogue lists sizes from 20 mm (1/2 inch) to 63 mm (2 inch), and reducers between sizes.
What should I tell you about a pipe fitting?
Material, size, connection type, pressure class and the fluid. Give the system standard or drawing reference if one exists.
Do you quote pipes as well as fittings?
Send pipe material, diameter, wall or class and length. The reply states what can be supplied.
Do you show prices?
No. Each request is quoted from the specification and quantity.
